LT Standard stock MCCW 1927 Motor car (STL download)

Individual STL files for downloading of the body/chassis/bogie components to make a 4mm scale model of LT Standard stock motor car (A end or D end) with flat lower body panels. Designed for motorising with a Tenshodo 26mm x 12mm diameter SPUD bogie.

Underframe and bogies should not require any post treatment after the normal sprue removal work.

Joins between ends and body are a neat fit, buts some filling will be necessary to avoid join lines. The body will then need a rub over with 320 grit then 400 dry abrade wet and dry and a final finish with 400 grit wet. 

STL saved at 4mm/1:76.2 scale - use your slicer software scaling for other scales

The amount of prep before painting will depend on how you set up the support structure, your print settings and your printers resolution. Prints from our Elegoo 16K Saturn Ultra printers with ABS-like resin need minimal prep to get a 'printing lines' free model.

By purchasing this download you agree to  your use only and not to share or resell to a third party.