Class 487: Waterloo & City Trailer OO/EM/P4 4mm 1:76 PRINTED MODEL

Now printing - delivery within 1 week

Kit with Body/chassis/bogie components to make a 4mm scale model of a Waterloo & City trailer car. Designed for operating with our Waterloo & City driving motor bogie,4 x 10.5mm diameter wheels on a 26mm axle over pinpoints required for the 2 trailing bogies of these cars.

Designed by O VS Bulleid, these trains entered service on the Waterloo and City line in 1940. In peak hours the trains ran with a Driving motor either end of three trailer cars.

Underframe and bogies should not require any post treatment after the normal sprue removal work.

Joins between ends and body are a neat fit, but some filling will be necessary to avoid join lines. The body will then need a rub over with 320 grit then 400 dry abrade wet and dry and a final finish with 400 grit wet. Cyanoacrylate with a 'kicker' (accelerant) is this best adhesive for 3D printer resin, in our opinion.

Prints from our Elegoo 16K Saturn Ultra printers with ABS-like resin need minimal prep to get a 'printing lines' free model.